Racing Fuel Tanks Are an Essential Race Car Component

By Byron Jonas

Race cars are remarkably complicated machines with a thousand and one different parts and pieces, all of which need to come together to create one harmonious and powerful final product. For real performance on the race track, no single aspect of the race car can be overlooked: everything from the tiniest O Ring to the bulkiest gasket needs to be spot on to have a winning vehicle.

With the advance of technology, one part in particular which has been changing a lot is the fuel tank on racing cars. Otherwise known as fuel cells, they need to fulfill certain criteria in order to be incorporated into a race car that don't apply when dealing with an ordinary vehicle.

As with most auto parts making up a race car, the fuel tank has to be sturdier, smarter, and it has to last longer. The fact that racing accidents occur at typically phenomenally high speeds only reinforces the need for these features, as the chances of the volatile gasoline becoming a problem even greater. Given these fantastic conditions which prevail on the race track, there is simply no way that the fuel tanks can be anything but optimal, to guarantee reliability and safety to the utmost.

One big difference exhibited by race car fuel tanks that is not to be found in their ordinary, layman version is the inclusion of a flexible inner liner to the tank body. This liner is added specifically so that in the case of a violent crash, the impact does not produce a fuel leak or complete spillage-the flexible liner absorbs the blow and keeps the fuel where it needs to be, thereby reducing fire risk.

The form of racing fuel tanks is another of their distinguishing features: they are generally shaped different than normal fuel tanks, which is done so that they can fit neatly and snugly inside the architecture of the car at hand. This sort of space economization is a fundamental aspect of good performance on the track; for example, instead of before or after the rear axle, the tank can be located directly above it.

An additional characteristic of racing fuel tanks is the technology used to help further reduce the chances of explosion and fire risk in general. Many racing cars incorporate open-cell foam cores in the fuel tank which effectively diminishes the chance that the fumes floating around in the empty portion of the tank will explode.

To help optimize performance out on the track while racing, it has been necessary to find a way to reduce the impact of the fuel as it swishes around inside from one side to another, which has been shown to cause jerks in the vehicle's movement and hence reduce performance. In addition to causing additional swivel, the same issue of the fuel moving around has also been shown to cause fuel starvation in certain cases, which means that the fuel is not getting extracted adequately from the tank.

Traditionally made out of metals such as steel and aluminum, over recent years there has been increasing experimentation with high density polyethylene (HDPE) as a fuel tank material. Though HDPE can be blown into very complex and appealing forms, they are not recommended for long term use due to the risk of fuel tank saturation as the fuel progressively penetrates the HDPE. - 21392

About the Author:

Byron Jonas acquires all his racing gear from GMP Racing Products. From racing suits, to fuel tanks, they have him covered

ADA Compliance Is a Necessary Feature

By Lenny Samuel

There are several different things that you need to be sure of when youre looking for a company to handle your parking lot striping and somewhere near the top of the its important to have a serious look at ADA compliance.

Making Your Lot ADA Compliant

Its all about the Americans With Disabilities Act and you need to be sure that your parking lot doesnt run afoul of it. So with everything else that youve got on your mind as a business owner, its a great idea for you to try and find a company that knows all about ADA compliance and can even handle any of the other things you might need done like sign installation and asphalt repair.

Finding the Right Company

Getting the right company on your side means that youll need to know what to look for. When you need to find a firm that can take on all of your parking lot striping needs and make sure that all the work is ADA compliant, its important that you know what to look for.

1. If they have a website, thats a good place to start. Look to make sure that theyve got enough information beyond an email address so that you know right away you can get a hold of them if youve got questions. Remember that a good customer service department generally means that youve picked a winner.

2. Take a good look at the inventory of goods and services that they produce. Generally speaking, a firm that does more than one thing well has taken the time to be professionals in their field. So when youre looking for that Striping San Diego company and you want to be sure that they are ADA compliant, take a look at how thorough they are in other areas as a well. When they advertise services in asphalt repair and seal coating as well, you know that youve found a potential winner.

You can find out the other things that you need to know from their About Us section. A company that works in this field needs to be insured, licensed and bonded. As well they need to understand that no two jobs are the same and that means they need to be flexible to be successful in the business.

Of course they need to be ADA compliant as well. Getting a Striping San Diego firm to work with you means that youll need to do a little home work to ensure you find a firm youll be happy with. - 21392

About the Author:

Lenny Samuel is well versed when it comes to ADA compliance. He's worked in the San Diego parking lot striping business for the last ten years.

Yamaha R6 fairing

By Thomas Clausen

Anyone who has ever been on a motorcycle for a short fast ride or a longer ride quickly learns to appreciate why a motorcycle has a fairing on the front. First, it saves you from getting pummeled by the wind at high speeds. Second, without one you will be having bugs for your next meal. And third, it makes your bike more aerodynamic and thus more fuel efficient.

There are occasions when you may want or need to remove the YAMAHA R6 FAIRING on your bike. Perhaps you no longer like the stock model and you want to change it over to an after market fairing for a custom look or to be more effective in a certain area. Regardless of the reason, you'll need a little time and patience, plus the correct tools to remove the fairing properly.

Even if you don't plan to replace the fairing, you could need to remove it for other reasons as well-like painting the bike, cleaning, or doing certain maintenance and repair jobs on your bike. Before you start taking anything apart, go online and look at some of the many blogs on the Internet that can give you some tips and pointers on how to do this correctly. Or pull out your motorcycle manual. The important thing is to know in advance that if you grab hold of it wrong, you could easily crack this lightweight piece and end up having to replace an expensive part even if that wasn't the original plan, so use caution.

A quick study of the YAMAHA R6 FAIRING reveals there are some small access points located periodically on the fairing. This is by design and provides the openings you need to do some routine maintenance work without actually removing the entire fairing. Be sure to use them if you can because they were put there to make things easier for you.

Don't really like your current YAMAHA R6 FAIRING? Many of the after market models range in price and offer different features designed for specific requirements. But whatever your reason for wanting a new one, everyone can safely agree that the fairing really impacts how good your bike looks and also the motorcycle's stability, aerodynamic performance, and the complete experience of riding the bike.

If you plan on taking this on yourself, you should be advised to take you time so as not to damage the bike or the fairing and make sure you follow the instructions to the letter so things are done right and safely. You will be unhooking things like your blinkers so make sure that when you reassemble you reconnect them so you can ride safely. When you are done you will have a great looking ride and the satisfaction of knowing you did it yourself. - 21392

About the Author:

Did you find this article interesting?? Make sure to check out Thomas Clausen's blog about Yamaha R6 Motorcycles Or maybe go straight to Thomas Clausen's Yamaha R6 Parts shop.

Three Things You Need To Know Before You Buy A Used Car Online

By JD Theis

You have to make several important decisions, when it comes to buying a car. A few of these decisions become more important when you purchase used cars for sale. Buying used cars online has become very simple, but this convenience can sometimes turn into uncertainty and irritation if you dont sort out three imperative car buying concerns prior to checking online:

1. What do you need the vehicle for?

You will not be able to go very far, if you search cars for sale, unless you are sure of what you want. Decide the purpose of the new car, whether it is for the kids or a backup car, something for long trips with the family or the primary car that will take you to work every day. You will also be able to narrow down the search by being sure who will drive the car. If you know why you want to buy the vehicle, you can bring down the category of vehicles you will have to looking at, like sedans, SUVs, compacts or trucks and you will be saved from surfing uselessly from one vehicle to another when you are searching online for your used car.

2. How much money can you spare?

Used cars can be bought in all ranges, from almost new to acceptably old and this can lead to a lot of price variations. If you set the upper limit in your budget for the used car purchase, it will allow you to narrow down the brands as well as the age of the car. While deciding your budget, keep in mind the features that you want in your car, the brands that you like, and the mileage that you are ready to take a car for. It is important to factor in the cost of transfer and registration when you make a budget for buying your used car.

3. How do you feel driving the car of your choice?

There is little doubt that when you purchase your used car online, you will surely get a cheaper car as compared to what the brick and mortar stores offer. It is possible that you are not able to test-drive the car previous to buying it. Not knowing how comfortable you are driving the new car you are buying can end up in a hazardous purchase decision. To find a solution you can go to your neighboring new and used car dealers and test the used car which you are looking forward to purchasing online. You will get a good idea of the performance of the car model as well as your comfort while driving it.

Once you know the response to the three above mentioned fundamental questions, you have very little chance of going wrong in making a used car buying decision. Sort these problems, and you will find that buying cars online is a fun and productive project. - 21392

About the Author:

Now make sure that you get the best deal when you buy used cars online at ibuyer, the car buying and selling portal with the largest number of owner posted used cars for sale.

The Process of Plastic Injection Molding

By Jim Pickeringson

In order to determine if, and how, plastic injection molding will be able to save you money, it is first important to understand exactly what plastic injection molding is and how it works. Plastic injection molding is the forcing of hot, melted plastic in to various molds in order to create pieces and parts that, when combined, make the product that it is being built whole. Plastic injection molding is often quite beneficial and is used when the traditional means of making parts is tedious and time consuming.

Companies have adopted this technology because of the cost benefit it provides them during the production process. Not only can they save an incredible amount of labor in the production of their products, but by ensuring uniformity throughout their product, they can avoid the mistakes of manufacturing that lead to whole batches of product needing to be remade, thus saving an enormous amount of money, too.

The use if plastic injection molding in the manufacturing world has truly revolutionized the way business is done. The process, which involves the forcing of super hot, melted plastic in to metal molds, ensures that all products are created to specification each and every time. This specification is determined by the size and shape of the molds being used and ensures there are no errors in the dimensions of the product so it fits as it should within the larger component it is being made for.

This ensures uniformity across the board and eliminates costly production errors that may produce 450,000 of the doll hand correctly, but creates flaws in the remaining 50,000 only for the company to have to redo those doll parts. Obviously, this type of error would cost them a considerable amount of time and money and it could all be avoided with by using plastic injection molding machinery in the production process.

Something to keep in mind, however, is that the initial inception of incorporating plastic injection molding machinery in to the production process is not cheap. You will need to purchase and have made the metal molds that need to be used in the product manufacturing, it is for this reason that a cost benefit analysis should be conducted to determine the viability of using plastic injection molding.

Keep in mind though, the initial investment in plastic injection molding machinery can be costly considering you must have the product molds made for each product you intend to produce -- these are not cheap, but if you are currently using outdated technology to produce your plastic products, then the investment is well worth considering once you realize the true cost-benefit potential. - 21392

About the Author:

Jim Pickeringson specializes in Plastic Injection Molding for manufacturing companies. He also has 20 years of experience in Injection Molding